Gutters and Downspouts in Aledo, Texas
Seamless gutter installation, guards and drainage correction across Aledo, Hudson Oaks, Willow Park and Benbrook.
Get a gutter assessment · (817) 631-1075Undersized Gutters Cause More Damage Than People Realize
North Texas rain does not arrive gently. It arrives as three inches in ninety minutes, and a gutter system sized for an average is a gutter system that overshoots in exactly the storms that matter. Gutters and downspouts in Aledo need to be specified for the roof area they serve and the intensity this climate produces, and a surprising number of the fascia rot, soffit staining and foundation-adjacent erosion problems we find during roof inspections trace directly back to an undersized or badly pitched gutter run. Roofing Aledo sizes gutter work to the roof rather than to whatever was there before. It is an unglamorous line of work that quietly protects the two most expensive things on the property, which are the roof edge and the foundation.
What Gutter Work Covers
Sized to the roof feeding it, hung on hidden hangers, and discharged clear of the foundation.
Seamless gutter fabrication on site
Aluminium gutter rolled to length at the property so the only joints are at corners and outlets, which removes the seams that are the first thing to leak on sectional gutter.
Correct sizing for the roof area served
Choosing between five-inch and six-inch profile based on the square footage and pitch draining into each run, rather than defaulting to whatever the previous installer used.
Downspout sizing and placement
Sufficient outlets, positioned so long runs are not asked to carry water further than they can, which is the most common cause of mid-run overflow.
Pitch and hanger installation
Setting the fall correctly and hanging on concealed hangers at proper spacing so the run does not sag and pond, which is where gutters begin to pull away from fascia.
Fascia and drip edge inspection
Checking and reporting the condition of the fascia and drip edge behind the old gutter while it is off, since that is the only time it is visible.
Gutter guard installation
Screen, micro-mesh and reverse-curve options explained honestly, including where guards genuinely help and where they create a different maintenance problem.
Drainage extension and discharge correction
Getting the water far enough from the foundation, including buried extensions and pop-up emitters where the grading requires it.
Repair of existing systems
Resealing corners and outlets, re-pitching sagging runs and replacing damaged sections where full replacement is not warranted.
Cleaning and flow testing
Clearing existing runs and flow testing so we can show you where a system is actually failing rather than assuming.
Colour matching to trim
A range of finishes matched to the existing fascia and trim so the system reads as part of the house.
How the Work Goes
Measured, quoted by the run, and formed at the house in a single day for most homes.
Measure and assess
We measure each run, work out the roof area draining into it, look at the existing pitch and outlet positions, and check the fascia behind the current gutter where it is visible. If the problem is pitch or outlet count rather than the gutter itself, we will tell you, because that is a much smaller job.
The scope and the sizing explained
You get an itemized quote with the profile, the linear footage, the number and placement of downspouts and any guard selection set out separately. We explain why the sizing is what it is, particularly when it differs from what is currently on the house, which it frequently does.
Fabrication and install
Gutter is rolled on site to the exact run lengths, hung on concealed hangers at correct spacing, sealed at corners and outlets, and flow tested before the crew leaves. Old gutter is hauled away and the perimeter is swept. Most single-family gutter jobs are a one-day install.
Why Have Your Roofer Do the Gutters
The roof and the gutter are one system
The drip edge, the fascia and the gutter interact, and splitting them between two contractors is how responsibility for a fascia problem ends up belonging to nobody. When we do both, there is one company to call.
We size for the storm, not the average
Specifying a gutter for typical rainfall is how you end up with water sheeting over the front of it four times a year. We size for the intensity this part of Texas actually produces.
We tell you when guards are not worth it
Gutter guards are excellent under heavy tree cover and largely unnecessary on an open lot. We are happy to install them and equally happy to tell you that your house does not need them.
- Insured crews
- Free gutter and drainage assessment
- Seamless gutter rolled on site
- Itemized pricing by run and outlet
- Flow tested before the crew leaves
Stop Water Ending Up Where It Should Not
Overflowing gutters take out fascia, soffit and eventually the ground at your foundation, and all three cost considerably more to fix than the gutter did. A measured assessment costs nothing.
(817) 631-1075Book a gutter assessment